ICP-RIE Cryo

Instrument:

ICP-RIE Cryo

Contact:

Svenn Ove Linde
Mark Chiappa

Technology Description:

Inductively Coupled Plasma etching is an anisotropic dry-etching process where material is removed with the use of chemically reactive plasma under a low pressure (~1-100 mTorr). Typically the material removed is a thinfilm previously deposited on a wafer. The ICP-RIE uses two independent RF sources, one to strike plasma in a gas mixture and one to create a DC bias which extracts and accelerates ions and radicals from the plasma towards a sample surface. This gives indipendent control of ion density and energy. ICP RIE is a popular dry-etching technique because of its possibilty for high ecth rates, great selectivity and reduced ion bombardment.

  • Materials allowed: everything which is not considered as contaminating within NanoLab rules, sample size can’t exceed 101.7 mm (4”) in diameter and 5 mm in thickness.
  • Process gases: H2, O2, N2, Ar, CF4, SF6, CHF3, He, CH4, Cl2 and BCl3.
  • Two 13.56MHz RF sources
  • Operating temperature: -150°C to 400°C
  • Typical applications: Low damage etching of III-V species, high rate anisotropic etch of Si for MEMS applications, high rate SiO2 etching, sputter etching applications (Pt, Al, etc.).
  • Base Pressure: 5E-7 Torr

Technical Information:

Category: Dry etch Area name: Thin Film & Dry Etch Model: PlasmaLab System 100-ICP180 Manufacturer: Oxford Instruments